Kommer...

Eksempel:

#include <SimpleDHT.h>

// for DHT22, VCC: 5V or 3V, GND: GND, DATA: 2
int pinDHT22 = 2;
SimpleDHT22 dht22(pinDHT22);

void setup() {
  Serial.begin(115200);
}

void loop() {
  // start working...
  Serial.println("=================================");
  Serial.println("Sample DHT22...");

  // read without samples.
  // @remark We use read2 to get a float data, such as 10.1*C
  // if user doesn't care about the accurate data, use read to get a byte data, such as 10*C.
  float temperature = 0;
  float humidity = 0;
  int err = SimpleDHTErrSuccess;
  if ((err = dht22.read2(&temperature, &humidity, NULL)) != SimpleDHTErrSuccess) {
    Serial.print("Read DHT22 failed, err="); Serial.println(err);delay(2000);
    return;
  }

  Serial.print("Sample OK: ");
  Serial.print((float)temperature); Serial.print(" *C, ");
  Serial.print((float)humidity); Serial.println(" RH%");

  // DHT22 sampling rate is 0.5HZ.
  delay(2500);
}

 

Details
Category: DHT22
Hits: 2811